APPLICATION SYSTEMS
Polyaspartic Fast-Curing System
This system is ideal for shop floors, warehouses, grocery stores, public restrooms, restaurants, and other heavy traffic areas. Its very low viscosity allows it to penetrate into the concrete up to 1/8" deep creating an extremely effective bond. It provides heavy-duty seamless surface with exceptional durability and service. Our Polyaspartic System takes only one day to fully cure and can be walked on two hours after installation. It is normally applied from 25 to 30 mils.
Xpedite_Polyaspartic.pdf
Xpedite Shield - Heavy Duty Coating
Xpedite Shield is an industrial grade, heavy duty, high build system that meets the most demanding applications. It is suitable for automotive repair shops, forklift use, semi-rigs, large aircraft hangars, industrial production floors, machine shops, and other heavy-duty floors. Xpedite Shield is a performance flooring system that includes four different coatings to a thickness of 20 to 25 mils. Its glossy finish reflects light in all directions providing a better illuminated work place. It is waterproof; stain proof, high impact resistant, scratch resistant, hot tire proof, impervious to all vehicle fluids, corrosive road salts, and most industrial acids. It will not yellow, dull or peel.
Xpedite_Shield_System.pdf.pdf
Cementitious Urethane System for Abusive Environments
Formulated to withstand aggressive chemical and thermal attack, this system is the answer for the most abusive environments, including food-processing areas. Our urethane-based system is a heavy-duty seamless resurfacer that provides exceptional durability and service. It bonds permanently to most any type of sound substrate including concrete, quarry tile, brick pavers and plywood. This system is installed with a roller applied 16-mil topcoat, a self- leveling system from 1/8" to 3/16" or by trowel method in thicknesses up to 3/8". Cures quickly for minimal down time.
Cementitious Urethane System.pdf
Moisture-Tolerant Flooring Systems
Formulated to withstand aggressive chemical and thermal attack, this system is the answer for the most abusive environments, these flooring systems were created to solve the problems of flooring failure due to moisture migration. They incorporate colored quartz in a hybrid floor system consisting of a moisture-tolerant urethane base coat and one-hour-curing methyl methacrylate (MMA) topcoats. Installation in as few as two days greatly reduces interruption to business. Quartz is available in fine (Q28) and coarse (Q11) sizes an in several color mixes. It can be applied to thickness of 1/8" to 1/4".
Moisture-Tolerant Systems.pdf
Spray-on Polyurea System
Sprayed-on polyurea is ideal for water tanks, secondary containment, waterproofing, and corrosion protection. It is a two-component modified polyurea elastomeric, 100% solids, instant-curing lining system. It is environmentally friendly product that contains neither solvents nor VOCs. The two components are mixed together at point of application to create a high performance elastomer. It dries and becomes solid in four seconds, allowing for multiple coats, adding up to the desired thickness. Provides a seamless flexible system that is impermeable and long lasting. Lining thickness: typically 1/16" (62.5 mils; 1.59 mm) up to 1/4". Read more at TOFF® Coat.
Xpedite Spray-on Polyurea.pdf
Concrete Pavement Repair
Our Xpedite PSC system is ideal to repair potholes and spalled concrete. It is a three-part specially formulated, 100% solid epoxy concrete that is applied to a trowel finish, level with the pavement. It cures in 8 hours and provides a compressive strength of 8,000 - 10,000 psi.
